Відео

Oh no!!! We're gonna have to see cute little workshop assistants throughout the video?!?! How will we survive the 'punishment'? 😩 😂😂😂

What type of stapler are you using?

Thank you, informative, well thought out, concise.

you should not have that wood resting on concrete

super helpful! thank you for the niche content

Soooo. How do you attach the faux beam to the ceiling if you don't have beams already there?

Looks so good! Video is exactly what I was looking for for my project. What did you use for the face frames?

Great video, very informative. I try to avoid painting brick, it turns a virtually maintenance free siding into an ongoing upkeep project. I’ve noticed that if the paint on the mortar joints begins to peel, it can trap moisture and accelerate deteriorations, especially in freezing temps.

what extended fence are you using?

Actually, Home Depot has lots of Island but not online. You have to go in store and they can try match the top, to your existing countertop. I don't know the price. But I am going to do what you have done so thanks for this great video!

To say that Harbour Freight "keeps innovating" is a tremendous stretch lol. But they definitely have plenty of tools at very fair price and some that are just harder to find even at big tool stores like HD.

Brilliant!!

I realize this is an old posting, but do you remember how long you were able to use the Jackery at your craft show? I'm planning to take my F1 to a craft show in September and don't want to get a battery that won't last the whole day. Did you find you wished you had the 1000 instead of the 500?

How much was to make this?

I don't need 'em but I bought 4! All black. They are going in my shop office.

I am discussing it with myself.. I have a Bosch orbital sander and I use it constantly. I have gone through three velcro pads. That equals the cost of the sander... I hope the festool last longer.

WHERE in the world can you find material settings for the F1U?? Xtool has NOT added the machine it their materials setting website page - Limited settings in the XCS materials library - EXTREMELY Frustrating! oh! and I DID NOT RECEIVE MY SAMPLE MATERIAL PACK!

Is it possible to do a dtf transfer on these leather patches and then heat press the patch on the hat? This will be my first time making hats excuse me if this is a stupid question lol thanks for any info

Woman’s set hammer at Walmart That was a dick head statement

The only thing of interest was that Saker router jig. Been looking at it (under several different names) but have never seen it in operation. I can see myself using it a fair amount, enough to pay the Amazon price ... Don't tictok.

So gyro laser for engraving and diode laser for cutting?

10:32 your wrist moving from the vibration in the slowed (or is it sped up?) footage! 😂 We're all just packages of jello like material 😂

You got that router jig for $5? Nice! The aluminum to melt down is probably worth that, lol and much better price than Sakars website listing of $40 some or Amazons 20 some! 😂 Also, went to go check the sand paper link, and you didn't put a space between end of link and Merch: so it just ends up taking to Amazon home page. (I copied and edited it to get there, but thought you might want to know so you can fix for affiliate link revenue.)

I don't have/use TikTok so don't see those ads, and while that #1 is useless for intended purpose, but for $6 could make a good sci-fi costume for like a space suit or something, lol

I liked the video at the intro with your kids!

How do you design your hat patches? And what program do you use?

Your vid SUCKS!

I can’t open the link to see the plans for the build. Can you send it to me?

Why you buy tools from Tic Tok?? Simple answer. You're an idiot!! Lol 😂

GREAT VID...THAT BABY PLANE WAS INTERESTING...SOME BETTER [TALLER] KNOBS WOULD MAKE IT BETTER I BELIEVE...JUST SAYING...

Can u engrave on genuine leather like for hat patches on either or just pu leather?

Got a link for that centre finder as the one listed is not the one shown if not do you remember the original makers name so I can search it

A great video! My X-Tool just came in for printing t-shirts as an addition to my other machines and I ca't wait to start working on golf hats. Thanks a lot.

Congratulations on baby #3 and WOW that tile looks amazing!!!

WORTH IT!!

I'm going to paste the part of my message directly below that was cutoff by the "Read More" label. I would appreciate replies". With that said, all of the video reviews I see here on UA-cam are very well done, including this one. No offense, but the problem I have is that the reviewers have either received a "free" Ultra, or they get a kickback of some sort. Since the live reveal of the Ultra, I have searched far and wide for a 100% unbiased review. So far, I haven't found any. The only negative comment "in print" that I have read said that LightBurn can be used, but is not fully functional on the Ultra. LightBurn appears to be the preferred industry standard.

I think the reason people do not use is that there is no hold down for stock. Having to use a gripper with it increases the investment. To me, it looked a little wonky with smaller pieces.

Have a Red brick Heritage Home in Sk ❤🙏✝️💗✋

**** To be fair, please note that I have never used a laser engraver/cutter but am in the research phase of getting one...maybe.*** What I don't want to do is to get a "starter" machine, only to realize that I need something more. What's holding me back right now are the price tags. Also, I emailed xTool customer support asking if they will be selling the Ultras on Amazon. They responded with a "no plans to list it on the Amazon platform now". I don't know if that's a "never", or just a "for right now". I have a decent gift card balance with Amazon which would help offset the purchase price. With that said, all of the video reviews I see here on UA-cam are very well done, including this one. No offense, but the problem I have is that the reviewers have either received a "free" Ultra, or they get a kickback of some sort. Since the live reveal of the Ultra, I have searched far and wide for a 100% unbiased review. So far, I haven't found any. The only negative comment "in print" that I have read said that LightBurn can be used, but is not fully functional on the Ultra. LightBurn appears to be the preferred industry standard.

whats with that massive mask...😅😂🤣 I never wear anything (eye).. never had any issues.(No safety)

Great for an EDC valet on the nightstand or dresser.

The IR laser will also work on the S1 correct? If im not mistaken, i believe that head will allow you to engrave most metals?

Hey, I’ve seen some people stain before and some after hanging the beam. Any reason you chose before? Asking because you have to fasten the beam, then fill and putty the hole. Does the stain hold after that?

Handy items for our woodworking. Especially like the inspector peeping around the corner so she can report to the boss what Daddy’s doing.

Thank you

If you don't care about looks, this stuff is awesome, if you want a clean look, buy the sticks of aluminum. I'm yet to see a system that looks good with this stuff. -Sincerely a dude that sells pneumatics for a living.

4500 dollars 💲💲 😱

Bought mine the Night they live streamed it just waiting for my shipping email.... the wait is brutal

lol ive noticed facebook market with them flooded at 50-60 dollars but its been sitting at lowes for 20 dollars for a month now.

Hi Markis, great video! I love the xTool lasers and look forward to learning more about the F1 Ultra. Already have the P2, D1, S1, and F1 so PROBABLY need to go ahead and complete the set...